River Embankment and Bank Failure: A Study on Geotechnical Characteristics and Stability Analysis
Abstract
Problem statement: Embankment failure and riverbank erosion are common problem in Bangladesh. Almost every year earthen embankments and riverbanks are facing problems like erosion, breaching or retirements. Among many reasons the major causes are considered due to the use of geotechnically unstable materials, improper method of construction, seepage and sliding. In this study the problem is considered geotechnical point of view where the geotechnical properties of failed Jamuna river embankment material and Padma riverbank material were investigated. Moreover, stability analysis technique of embankment has been reviewed through a case study of Manu river embankement. Approach: Sample materials were collected during field investigation and tested at laboratory according to Japanese Industrial Standard (JIS). Limit equilibrium stability analysis and steady state seepage analysis was conducted for Manu river embankment to review the existing design procedure of embankment. Results: Study results reveal that the soil of Jamuna river embankment is not well graded sand and the permeability is found minimum of 1.29×10-5 cm sec−1 (at w = 24%) which increases rapidly in submerge condition. The maximum strength is found 51.8 kN m−2 which is not preferable as embankment material. Moreover, the slope is not well protected that makes the embankment vulnerable to erosion. In contrast, the soil of Padma riverbank contains mostly sand with 25% clay content. Both permeability and strength of bank material decrease rapidly with the increase of water content. Nevertheless, tension crack and toe erosion also accelerate the mass failure mechanism of riverbank. From case study the Factor of Safety (FS) is found overestimated of about 22-24% in stability analysis of embankment in usual practice. Conclusion: Embankment soil needs to be improved geotechnically to minimize mass failure. Geo-bags, cement composites with reinforcement could be used for slope protection. To obtain reliable factor of safety seepage analysis is recommended in designing stable embankment.
DOI: https://doi.org/10.3844/ajessp.2011.102.107
Copyright: © 2011 Md. Bellal Hossain, Toshinori Sakai and Md. Zakaria Hossain. This is an open access article distributed under the terms of the
Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
- 6,247 Views
- 9,359 Downloads
- 22 Citations
Download
Keywords
- Embankment material
- riverbank failure
- geotechnical properties
- seepage analysis
- stability analysis
- Japanese Industrial Standard (JIS)
- Factor of Safety (FS)
- Finite Element Method (FEM)
- embankment failure