Research Article Open Access

Optimization of the Geometrical Parameters of a Solar Bubble Pump for Absorption-Diffusion Cooling Systems

N. Dammak1, B. Chaouachi1, S. Gabsi1 and M. Bourouis2
  • 1 Omar Ibn El Khattab Street-6029 Gabes, Tunisia
  • 2 University Rovira iVirgili, Spain

Abstract

Problem statement: The objective of this study was to optimize the geometrical parameters of a bubble pump integrated in a solar flat plate collector. Approach: This solar bubble pump was part of an ammonia/water/helium (NH3/H2O/He) absorption-diffusion cooling system. Results: An empirical model was developed on the basis of momentum, mass, material equations and energy balances. The mathematical model was solved using the simulation tool “Engineering Equation Solver (EES)”. Conclusion/Recommendations: Using metrological data from Gabes (Tunisia) various parameters were geometrically optimized for maximum bubble pump efficiency which was best for a bubble pump tube diameter of 6 mm, a tube length of 1.5 m, an inclination to the horizontal between 30 and 50° of the solar flat plate collector and a submergence ratio between 0.2 and 0.3.

American Journal of Engineering and Applied Sciences
Volume 3 No. 4, 2010, 693-698

DOI: https://doi.org/10.3844/ajeassp.2010.693.698

Submitted On: 12 May 2010 Published On: 5 November 2010

How to Cite: Dammak, N., Chaouachi, B., Gabsi, S. & Bourouis, M. (2010). Optimization of the Geometrical Parameters of a Solar Bubble Pump for Absorption-Diffusion Cooling Systems. American Journal of Engineering and Applied Sciences, 3(4), 693-698. https://doi.org/10.3844/ajeassp.2010.693.698

  • 4,262 Views
  • 3,783 Downloads
  • 20 Citations

Download

Keywords

  • Bubble pump
  • absorption-diffusion cycle
  • ammonia-water
  • solar cooling