Investigation of the Critical Clearing Time of Power System with Synchronous Machine Model Including Saliency
- 1 Division of Electrical Engineering, Faculty of Engineering at Si Racha, Kasetsart University, 199 M.6, Tungsukhla, Si Racha, Chonburi, 20230, Thailand
Abstract
Problem statement: Most of synchronous generator applied in power system is the salient pole type. Most of previous researches use non-salient model to evaluate the critical clearing time. Thus the results of critical clearing time of power system may be error. Approach: Thus this paper investigate the critical clearing time of power system with synchronous machine. The mathematical model of non-salient pole and salient pole synchronous machine model in power system are symmetrically derived. The critical clearing time of both models are tested and compared on various cases. Results: The critical clearing time of the power system with synchronous including saliency is slightly higher that of non saliency model. Conclusion: It is found from simulation results that even swing curve of both models is obviously different. Their critical clearing times are slightly different.
DOI: https://doi.org/10.3844/ajassp.2012.227.230
Copyright: © 2012 Prechanon Kumkratug. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
- 3,756 Views
- 4,565 Downloads
- 4 Citations
Download
Keywords
- Power system stability
- transient stability
- critical clearing time
- FACTS devices
- salient pole
- non-salient pole