Fabric Behavior of Sand in Post-liquefaction
Abstract
An anisotropic plasticity model for post-liquefaction of the undrained behavior of sand is presented. The model incorporates the critical/steady state concept that postulates the existence of a state where sand continuously deforms at a certain constant effective stress depending two main parameters of both initial bulk parameters (void ratio or relative density) and the stress level (mean stress). The local instability of saturated sand within post-liquefaction is highly dependent on the residual inherent/induced anisotropy, bedding plane effects and stress/strain path. Most of the models developed using stress/strain invariants are not capable of identifying the parameters depending on orientation such as fabric. This is mainly because stress/strain invariants are quantities similar to scalar quantities and not capable of carrying directional information with them. The constitutive equations of the model are derived within the context of non-linear elastic behavior of the whole medium and plastic sliding of interfaces of predefined multi-planes. The proposed multi-plane based model is capable of predicting the behavior of soils on the basis of plastic sliding mechanisms, elastic behavior of particles and possibilities to see the micro-fabric effects as natural anisotropy as well as induced anisotropy in plasticity. The model is capable of predicting the behavior of soil under different orientation of bedding plane, history of strain progression during the application of any stress/strain paths. The influences of rotation of the direction of principal stress and strain axes and induced anisotropy are included in a rational way without any additional hypotheses. The spatial strength distribution at a location as an approximation of probable mobilized sliding mechanism is proposed as an ellipsoid function built up on bedding plane.
DOI: https://doi.org/10.3844/ajassp.2005.1562.1573
Copyright: © 2005 Seyed Amirodin Sadrnejad. This is an open access article distributed under the terms of the
Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
- 2,782 Views
- 2,706 Downloads
- 1 Citations
Download
Keywords
- Induced anisotropic plasticity
- post-liquefaction
- multi-plane
- elastic-plastic